Initial commit
This commit is contained in:
@@ -0,0 +1,352 @@
|
||||
#include "display/lcd_display.h"
|
||||
#include "esp_lcd_sh8601.h"
|
||||
#include "wifi_board.h"
|
||||
|
||||
#include "application.h"
|
||||
#include "axp2101.h"
|
||||
#include "button.h"
|
||||
#include "codecs/box_audio_codec.h"
|
||||
#include "config.h"
|
||||
#include "i2c_device.h"
|
||||
#include "led/single_led.h"
|
||||
#include "mcp_server.h"
|
||||
#include "power_save_timer.h"
|
||||
|
||||
#include <driver/i2c_master.h>
|
||||
#include <driver/spi_master.h>
|
||||
#include <esp_lcd_panel_vendor.h>
|
||||
#include <esp_log.h>
|
||||
#include <esp_ota_ops.h>
|
||||
#include <esp_partition.h>
|
||||
#include "settings.h"
|
||||
|
||||
#include <esp_lcd_touch_cst9217.h>
|
||||
#include <esp_lvgl_port.h>
|
||||
#include <lvgl.h>
|
||||
|
||||
#define TAG "WaveshareEsp32c6TouchAMOLED2inch16"
|
||||
|
||||
class Pmic : public Axp2101 {
|
||||
public:
|
||||
Pmic(i2c_master_bus_handle_t i2c_bus, uint8_t addr) : Axp2101(i2c_bus, addr) {
|
||||
WriteReg(0x22, 0b110); // PWRON > OFFLEVEL as POWEROFF Source enable
|
||||
WriteReg(0x27, 0x10); // hold 4s to power off
|
||||
|
||||
// Disable All DCs but DC1
|
||||
WriteReg(0x80, 0x01);
|
||||
// Disable All LDOs
|
||||
WriteReg(0x90, 0x00);
|
||||
WriteReg(0x91, 0x00);
|
||||
|
||||
// Set DC1 to 3.3V
|
||||
WriteReg(0x82, (3300 - 1500) / 100);
|
||||
|
||||
// Set ALDO1 to 3.3V
|
||||
WriteReg(0x92, (3300 - 500) / 100);
|
||||
WriteReg(0x93, (3300 - 500) / 100);
|
||||
WriteReg(0x94, (3300 - 500) / 100);
|
||||
WriteReg(0x95, (3300 - 500) / 100);
|
||||
|
||||
// Enable ALDO1(MIC)
|
||||
WriteReg(0x90, 0x0F);
|
||||
|
||||
WriteReg(0x64, 0x02); // CV charger voltage setting to 4.1V
|
||||
|
||||
WriteReg(0x61, 0x02); // set Main battery precharge current to 50mA
|
||||
WriteReg(0x62, 0x0A); // set Main battery charger current to 400mA ( 0x08-200mA,
|
||||
// 0x09-300mA, 0x0A-400mA )
|
||||
WriteReg(0x63, 0x01); // set Main battery term charge current to 25mA
|
||||
}
|
||||
|
||||
void Pmic_SetAldo3(bool enable) {
|
||||
uint8_t reg = ReadReg(0x90);
|
||||
if (enable) {
|
||||
reg |= 0x04;
|
||||
} else {
|
||||
reg &= ~0x04;
|
||||
}
|
||||
WriteReg(0x90, reg);
|
||||
}
|
||||
|
||||
void Pmic_SetAldo2(bool enable) {
|
||||
uint8_t reg = ReadReg(0x90);
|
||||
if (enable) {
|
||||
reg |= 0x02;
|
||||
} else {
|
||||
reg &= ~0x02;
|
||||
}
|
||||
WriteReg(0x90, reg);
|
||||
}
|
||||
};
|
||||
|
||||
static const sh8601_lcd_init_cmd_t vendor_specific_init[] = {
|
||||
{0x11, (uint8_t[]){0x00}, 0, 120},
|
||||
{0xC4, (uint8_t[]){0x80}, 1, 0},
|
||||
{0x44, (uint8_t[]){0x01, 0xD1}, 2, 0},
|
||||
{0x35, (uint8_t[]){0x00}, 1, 0},
|
||||
{0x36, (uint8_t[]){0xA0}, 1, 0},
|
||||
{0x53, (uint8_t[]){0x20}, 1, 10},
|
||||
{0x63, (uint8_t[]){0xFF}, 1, 10},
|
||||
{0x51, (uint8_t[]){0x00}, 1, 10},
|
||||
{0x2A, (uint8_t[]){0x00, 0x16, 0x01, 0xAF}, 4, 0},
|
||||
{0x2B, (uint8_t[]){0x00, 0x00, 0x01, 0xF5}, 4, 0},
|
||||
{0x29, (uint8_t[]){0x00}, 0, 10},
|
||||
{0x51, (uint8_t[]){0xFF}, 1, 0},
|
||||
};
|
||||
|
||||
// 在waveshare_amoled_2_16类之前添加新的显示类
|
||||
class CustomLcdDisplay : public SpiLcdDisplay {
|
||||
public:
|
||||
static void rounder_event_cb(lv_event_t* e) {
|
||||
lv_area_t* area = (lv_area_t*)lv_event_get_param(e);
|
||||
uint16_t x1 = area->x1;
|
||||
uint16_t x2 = area->x2;
|
||||
|
||||
uint16_t y1 = area->y1;
|
||||
uint16_t y2 = area->y2;
|
||||
|
||||
// round the start of coordinate down to the nearest 2M number
|
||||
area->x1 = (x1 >> 1) << 1;
|
||||
area->y1 = (y1 >> 1) << 1;
|
||||
// round the end of coordinate up to the nearest 2N+1 number
|
||||
area->x2 = ((x2 >> 1) << 1) + 1;
|
||||
area->y2 = ((y2 >> 1) << 1) + 1;
|
||||
}
|
||||
|
||||
CustomLcdDisplay(esp_lcd_panel_io_handle_t io_handle, esp_lcd_panel_handle_t panel_handle,
|
||||
int width, int height, int offset_x, int offset_y, bool mirror_x,
|
||||
bool mirror_y, bool swap_xy)
|
||||
: SpiLcdDisplay(io_handle, panel_handle, width, height, offset_x, offset_y, mirror_x,
|
||||
mirror_y, swap_xy) {}
|
||||
|
||||
virtual void SetupUI() override {
|
||||
// Call parent SetupUI() first to create all lvgl objects
|
||||
SpiLcdDisplay::SetupUI();
|
||||
|
||||
DisplayLockGuard lock(this);
|
||||
lv_obj_set_style_pad_left(top_bar_, 60, 0);
|
||||
lv_obj_set_style_pad_right(top_bar_, 60, 0);
|
||||
lv_display_add_event_cb(display_, rounder_event_cb, LV_EVENT_INVALIDATE_AREA, NULL);
|
||||
}
|
||||
};
|
||||
|
||||
class CustomBacklight : public Backlight {
|
||||
public:
|
||||
CustomBacklight(esp_lcd_panel_io_handle_t panel_io) : Backlight(), panel_io_(panel_io) {}
|
||||
|
||||
protected:
|
||||
esp_lcd_panel_io_handle_t panel_io_;
|
||||
|
||||
virtual void SetBrightnessImpl(uint8_t brightness) override {
|
||||
auto display = Board::GetInstance().GetDisplay();
|
||||
DisplayLockGuard lock(display);
|
||||
uint8_t data[1] = {((uint8_t)((255 * brightness) / 100))};
|
||||
int lcd_cmd = 0x51;
|
||||
lcd_cmd &= 0xff;
|
||||
lcd_cmd <<= 8;
|
||||
lcd_cmd |= 0x02UL << 24;
|
||||
esp_lcd_panel_io_tx_param(panel_io_, lcd_cmd, &data, sizeof(data));
|
||||
}
|
||||
};
|
||||
|
||||
class WaveshareEsp32c6TouchAMOLED2inch16 : public WifiBoard {
|
||||
private:
|
||||
i2c_master_bus_handle_t i2c_bus_;
|
||||
Pmic* pmic_ = nullptr;
|
||||
Button boot_button_;
|
||||
CustomLcdDisplay* display_;
|
||||
CustomBacklight* backlight_;
|
||||
PowerSaveTimer* power_save_timer_;
|
||||
|
||||
void InitializePowerSaveTimer() {
|
||||
power_save_timer_ = new PowerSaveTimer(-1, 120, 1200);
|
||||
power_save_timer_->OnEnterSleepMode([this]() {
|
||||
GetDisplay()->SetPowerSaveMode(true);
|
||||
GetBacklight()->SetBrightness(20);
|
||||
});
|
||||
power_save_timer_->OnExitSleepMode([this]() {
|
||||
GetDisplay()->SetPowerSaveMode(false);
|
||||
GetBacklight()->RestoreBrightness();
|
||||
});
|
||||
power_save_timer_->OnShutdownRequest([this]() { pmic_->PowerOff(); });
|
||||
power_save_timer_->SetEnabled(true);
|
||||
}
|
||||
|
||||
void InitializeCodecI2c() {
|
||||
// Initialize I2C peripheral
|
||||
i2c_master_bus_config_t i2c_bus_cfg = {
|
||||
.i2c_port = I2C_NUM_0,
|
||||
.sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
|
||||
.scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
|
||||
.clk_source = I2C_CLK_SRC_DEFAULT,
|
||||
.flags =
|
||||
{
|
||||
.enable_internal_pullup = 1,
|
||||
},
|
||||
};
|
||||
ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
|
||||
}
|
||||
|
||||
void InitializeAxp2101() {
|
||||
ESP_LOGI(TAG, "Init AXP2101");
|
||||
pmic_ = new Pmic(i2c_bus_, 0x34);
|
||||
}
|
||||
|
||||
void InitializeSpi() {
|
||||
spi_bus_config_t buscfg = {};
|
||||
buscfg.sclk_io_num = LCD_PCLK;
|
||||
buscfg.data0_io_num = LCD_D0;
|
||||
buscfg.data1_io_num = LCD_D1;
|
||||
buscfg.data2_io_num = LCD_D2;
|
||||
buscfg.data3_io_num = LCD_D3;
|
||||
buscfg.max_transfer_sz = LCD_H_RES * LCD_V_RES * sizeof(uint16_t);
|
||||
ESP_ERROR_CHECK(spi_bus_initialize(SPI2_HOST, &buscfg, SPI_DMA_CH_AUTO));
|
||||
}
|
||||
|
||||
void InitializeButtons() {
|
||||
boot_button_.OnClick([this]() {
|
||||
auto& app = Application::GetInstance();
|
||||
if (app.GetDeviceState() == kDeviceStateStarting) {
|
||||
EnterWifiConfigMode();
|
||||
return;
|
||||
}
|
||||
app.ToggleChatState();
|
||||
});
|
||||
}
|
||||
|
||||
int DisplayPort_DispReset() {
|
||||
pmic_->Pmic_SetAldo3(1);
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
pmic_->Pmic_SetAldo3(0);
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
pmic_->Pmic_SetAldo3(1);
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
void InitializeSH8601Display() {
|
||||
esp_lcd_panel_io_handle_t panel_io = nullptr;
|
||||
esp_lcd_panel_handle_t panel = nullptr;
|
||||
|
||||
// 液晶屏控制IO初始化
|
||||
ESP_LOGD(TAG, "Install panel IO");
|
||||
esp_lcd_panel_io_spi_config_t io_config =
|
||||
SH8601_PANEL_IO_QSPI_CONFIG(LCD_CS, nullptr, nullptr);
|
||||
ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI2_HOST, &io_config, &panel_io));
|
||||
|
||||
// 初始化液晶屏驱动芯片
|
||||
ESP_LOGD(TAG, "Install LCD driver");
|
||||
const sh8601_vendor_config_t vendor_config = {
|
||||
.init_cmds = &vendor_specific_init[0],
|
||||
.init_cmds_size = sizeof(vendor_specific_init) / sizeof(sh8601_lcd_init_cmd_t),
|
||||
.flags = {
|
||||
.use_qspi_interface = 1,
|
||||
}};
|
||||
|
||||
esp_lcd_panel_dev_config_t panel_config = {};
|
||||
panel_config.reset_gpio_num = LCD_RST;
|
||||
panel_config.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB;
|
||||
panel_config.bits_per_pixel = 16;
|
||||
panel_config.vendor_config = (void*)&vendor_config;
|
||||
ESP_ERROR_CHECK(esp_lcd_new_panel_sh8601(panel_io, &panel_config, &panel));
|
||||
ESP_ERROR_CHECK(DisplayPort_DispReset());
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_init(panel));
|
||||
display_ = new CustomLcdDisplay(panel_io, panel, LCD_H_RES, LCD_V_RES, DISPLAY_OFFSET_X,
|
||||
DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y,
|
||||
DISPLAY_SWAP_XY);
|
||||
backlight_ = new CustomBacklight(panel_io);
|
||||
backlight_->RestoreBrightness();
|
||||
}
|
||||
|
||||
void InitializeTouch() {
|
||||
esp_lcd_touch_handle_t tp;
|
||||
esp_lcd_touch_config_t tp_cfg = {
|
||||
.x_max = LCD_H_RES - 1,
|
||||
.y_max = LCD_V_RES - 1,
|
||||
.rst_gpio_num = TP_RST_GPIO,
|
||||
.int_gpio_num = TP_INT_GPIO,
|
||||
.levels =
|
||||
{
|
||||
.reset = 0,
|
||||
.interrupt = 0,
|
||||
},
|
||||
.flags =
|
||||
{
|
||||
.swap_xy = 1,
|
||||
.mirror_x = 0,
|
||||
.mirror_y = 1,
|
||||
},
|
||||
};
|
||||
esp_lcd_panel_io_handle_t tp_io_handle = NULL;
|
||||
esp_lcd_panel_io_i2c_config_t tp_io_config = ESP_LCD_TOUCH_IO_I2C_CST9217_CONFIG();
|
||||
tp_io_config.scl_speed_hz = 400 * 1000;
|
||||
ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c(i2c_bus_, &tp_io_config, &tp_io_handle));
|
||||
ESP_LOGI(TAG, "Initialize touch controller");
|
||||
ESP_ERROR_CHECK(esp_lcd_touch_new_i2c_cst9217(tp_io_handle, &tp_cfg, &tp));
|
||||
const lvgl_port_touch_cfg_t touch_cfg = {
|
||||
.disp = lv_display_get_default(),
|
||||
.handle = tp,
|
||||
};
|
||||
lvgl_port_add_touch(&touch_cfg);
|
||||
ESP_LOGI(TAG, "Touch panel initialized successfully");
|
||||
}
|
||||
|
||||
// 初始化工具
|
||||
void InitializeTools() {
|
||||
auto& mcp_server = McpServer::GetInstance();
|
||||
mcp_server.AddTool("self.system.reconfigure_wifi",
|
||||
"End this conversation and enter WiFi configuration mode.\n"
|
||||
"**CAUTION** You must ask the user to confirm this action.",
|
||||
PropertyList(), [this](const PropertyList& properties) {
|
||||
EnterWifiConfigMode();
|
||||
return true;
|
||||
});
|
||||
}
|
||||
|
||||
public:
|
||||
WaveshareEsp32c6TouchAMOLED2inch16() : boot_button_(BOOT_BUTTON_GPIO) {
|
||||
InitializePowerSaveTimer();
|
||||
InitializeCodecI2c();
|
||||
InitializeAxp2101();
|
||||
InitializeSpi();
|
||||
InitializeSH8601Display();
|
||||
InitializeTouch();
|
||||
InitializeButtons();
|
||||
InitializeTools();
|
||||
}
|
||||
|
||||
virtual AudioCodec* GetAudioCodec() override {
|
||||
static BoxAudioCodec audio_codec(
|
||||
i2c_bus_, AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE, AUDIO_I2S_GPIO_MCLK,
|
||||
AUDIO_I2S_GPIO_BCLK, AUDIO_I2S_GPIO_WS, AUDIO_I2S_GPIO_DOUT, AUDIO_I2S_GPIO_DIN,
|
||||
AUDIO_CODEC_PA_PIN, AUDIO_CODEC_ES8311_ADDR, AUDIO_CODEC_ES7210_ADDR,
|
||||
AUDIO_INPUT_REFERENCE);
|
||||
return &audio_codec;
|
||||
}
|
||||
|
||||
virtual Display* GetDisplay() override { return display_; }
|
||||
|
||||
virtual Backlight* GetBacklight() override { return backlight_; }
|
||||
|
||||
virtual bool GetBatteryLevel(int& level, bool& charging, bool& discharging) override {
|
||||
static bool last_discharging = false;
|
||||
charging = pmic_->IsCharging();
|
||||
discharging = pmic_->IsDischarging();
|
||||
if (discharging != last_discharging) {
|
||||
power_save_timer_->SetEnabled(discharging);
|
||||
last_discharging = discharging;
|
||||
}
|
||||
|
||||
level = pmic_->GetBatteryLevel();
|
||||
return true;
|
||||
}
|
||||
|
||||
virtual void SetPowerSaveLevel(PowerSaveLevel level) override {
|
||||
if (level != PowerSaveLevel::LOW_POWER) {
|
||||
power_save_timer_->WakeUp();
|
||||
}
|
||||
WifiBoard::SetPowerSaveLevel(level);
|
||||
}
|
||||
};
|
||||
|
||||
DECLARE_BOARD(WaveshareEsp32c6TouchAMOLED2inch16);
|
||||
Reference in New Issue
Block a user