356 lines
12 KiB
C++
356 lines
12 KiB
C++
#include "wifi_board.h"
|
|
#include "codecs/box_audio_codec.h"
|
|
#include "display/lcd_display.h"
|
|
#include "system_reset.h"
|
|
#include "application.h"
|
|
#include "button.h"
|
|
#include "config.h"
|
|
#include "mcp_server.h"
|
|
|
|
#include <esp_log.h>
|
|
#include "i2c_device.h"
|
|
#include <driver/i2c_master.h>
|
|
#include <wifi_station.h>
|
|
#include <esp_lcd_panel_vendor.h>
|
|
#include <esp_lcd_panel_io.h>
|
|
#include <esp_lcd_panel_ops.h>
|
|
|
|
#include <esp_timer.h>
|
|
|
|
#include "power_save_timer.h"
|
|
#include "assets/lang_config.h"
|
|
|
|
#include <esp_lcd_touch_cst816s.h>
|
|
#include <esp_lvgl_port.h>
|
|
#include "driver/gpio.h"
|
|
|
|
#include "iot_button.h"
|
|
|
|
#include "power_manager.h"
|
|
#include "esp_ota_ops.h"
|
|
|
|
#define TAG "waveshare_esp32_s3_touch_lcd_1_54"
|
|
|
|
class CustomButton: public Button{
|
|
public:
|
|
void OnPressDownDel(void) {
|
|
if (button_handle_ == nullptr) {
|
|
return;
|
|
}
|
|
on_press_down_ = NULL;
|
|
iot_button_unregister_cb(button_handle_, BUTTON_PRESS_DOWN, nullptr);
|
|
}
|
|
void OnPressUpDel(void) {
|
|
if (button_handle_ == nullptr) {
|
|
return;
|
|
}
|
|
on_press_up_ = NULL;
|
|
iot_button_unregister_cb(button_handle_, BUTTON_PRESS_UP, nullptr);
|
|
}
|
|
};
|
|
|
|
|
|
|
|
class CustomBoard : public WifiBoard {
|
|
private:
|
|
CustomButton pwr_button_;
|
|
CustomButton volume_up_button_;
|
|
CustomButton volume_down_button_;
|
|
i2c_master_bus_handle_t i2c_bus_;
|
|
LcdDisplay* display_;
|
|
PowerManager* power_manager_ = nullptr;
|
|
PowerSaveTimer* power_save_timer_ = nullptr;
|
|
|
|
void InitializePowerManager() {
|
|
power_manager_ = new PowerManager(BATTERY_CHARGING_PIN, BATTERY_ADC_PIN, BATTERY_EN_PIN);
|
|
power_manager_->PowerON();
|
|
}
|
|
|
|
void InitializePowerSaveTimer() {
|
|
power_save_timer_ = new PowerSaveTimer(-1, 60, 300);
|
|
power_save_timer_->OnEnterSleepMode([this]() {
|
|
auto display = GetDisplay();
|
|
display->SetChatMessage("system", "");
|
|
display->SetEmotion("sleepy");
|
|
GetBacklight()->SetBrightness(20);
|
|
});
|
|
power_save_timer_->OnExitSleepMode([this]() {
|
|
auto display = GetDisplay();
|
|
display->SetChatMessage("system", "");
|
|
display->SetEmotion("neutral");
|
|
GetBacklight()->RestoreBrightness();
|
|
});
|
|
power_save_timer_->OnShutdownRequest([this]() {
|
|
power_manager_->PowerOff();
|
|
});
|
|
power_save_timer_->SetEnabled(true);
|
|
}
|
|
|
|
void InitializeI2c() {
|
|
// Initialize I2C peripheral
|
|
i2c_master_bus_config_t i2c_bus_cfg = {
|
|
.i2c_port = (i2c_port_t)0,
|
|
.sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
|
|
.scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
|
|
.clk_source = I2C_CLK_SRC_DEFAULT,
|
|
.glitch_ignore_cnt = 7,
|
|
.intr_priority = 0,
|
|
.trans_queue_depth = 0,
|
|
.flags = {
|
|
.enable_internal_pullup = 1,
|
|
},
|
|
};
|
|
ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
|
|
}
|
|
|
|
void InitializeSpi() {
|
|
ESP_LOGI(TAG, "Initialize QSPI bus");
|
|
spi_bus_config_t buscfg = {};
|
|
buscfg.mosi_io_num = DISPLAY_MOSI_PIN;
|
|
buscfg.miso_io_num = DISPLAY_MISO_PIN;
|
|
buscfg.sclk_io_num = DISPLAY_CLK_PIN;
|
|
buscfg.quadwp_io_num = GPIO_NUM_NC;
|
|
buscfg.quadhd_io_num = GPIO_NUM_NC;
|
|
buscfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * sizeof(uint16_t);
|
|
ESP_ERROR_CHECK(spi_bus_initialize(SPI3_HOST, &buscfg, SPI_DMA_CH_AUTO));
|
|
}
|
|
|
|
void InitializeTouch()
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
esp_lcd_touch_handle_t touch_handle;
|
|
|
|
esp_lcd_panel_io_handle_t tp_io_handle = NULL;
|
|
|
|
esp_lcd_panel_io_i2c_config_t tp_io_config = {
|
|
.dev_addr = ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS,
|
|
.on_color_trans_done = 0,
|
|
.user_ctx = 0,
|
|
.control_phase_bytes = 1,
|
|
.dc_bit_offset = 0,
|
|
.lcd_cmd_bits = 8,
|
|
.lcd_param_bits = 0,
|
|
.flags =
|
|
{
|
|
.dc_low_on_data = 0,
|
|
.disable_control_phase = 1,
|
|
},
|
|
};
|
|
ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c(i2c_bus_, &tp_io_config, &tp_io_handle));
|
|
|
|
esp_lcd_touch_config_t tp_cfg = {
|
|
.x_max = DISPLAY_WIDTH,
|
|
.y_max = DISPLAY_HEIGHT,
|
|
.rst_gpio_num = TOOUCH_RST_PIN,
|
|
.int_gpio_num = TOOUCH_INT_PIN,
|
|
.flags = {
|
|
.swap_xy = 0,
|
|
.mirror_x = 0,
|
|
.mirror_y = 0,
|
|
},
|
|
};
|
|
ESP_LOGI(TAG, "Initialize touch controller CST816");
|
|
ret = esp_lcd_touch_new_i2c_cst816s(tp_io_handle, &tp_cfg, &touch_handle);
|
|
if (ret == ESP_OK)
|
|
{
|
|
const lvgl_port_touch_cfg_t touch_cfg = {
|
|
.disp = lv_display_get_default(),
|
|
.handle = touch_handle,
|
|
};
|
|
lvgl_port_add_touch(&touch_cfg);
|
|
ESP_LOGI(TAG, "Touch panel initialized successfully");
|
|
}
|
|
}
|
|
|
|
void InitializeLcdDisplay() {
|
|
esp_lcd_panel_io_handle_t panel_io = nullptr;
|
|
esp_lcd_panel_handle_t panel = nullptr;
|
|
// 液晶屏控制IO初始化
|
|
ESP_LOGI(TAG, "Install panel IO");
|
|
esp_lcd_panel_io_spi_config_t io_config = {};
|
|
io_config.cs_gpio_num = DISPLAY_CS_PIN;
|
|
io_config.dc_gpio_num = DISPLAY_DC_PIN;
|
|
io_config.spi_mode = DISPLAY_SPI_MODE;
|
|
io_config.pclk_hz = 40 * 1000 * 1000;
|
|
io_config.trans_queue_depth = 10;
|
|
io_config.lcd_cmd_bits = 8;
|
|
io_config.lcd_param_bits = 8;
|
|
ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI3_HOST, &io_config, &panel_io));
|
|
|
|
|
|
// 初始化液晶屏驱动芯片
|
|
ESP_LOGI(TAG, "Install LCD driver");
|
|
esp_lcd_panel_dev_config_t panel_config = {};
|
|
panel_config.reset_gpio_num = DISPLAY_RST_PIN;
|
|
panel_config.rgb_ele_order = DISPLAY_RGB_ORDER;
|
|
panel_config.bits_per_pixel = 16;
|
|
|
|
ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel));
|
|
|
|
|
|
esp_lcd_panel_reset(panel);
|
|
|
|
esp_lcd_panel_init(panel);
|
|
esp_lcd_panel_invert_color(panel, DISPLAY_INVERT_COLOR);
|
|
esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY);
|
|
esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);
|
|
|
|
|
|
display_ = new SpiLcdDisplay(panel_io, panel,
|
|
DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY
|
|
);
|
|
}
|
|
|
|
void InitializeButtons() {
|
|
|
|
pwr_button_.OnPressUp([this]() {
|
|
pwr_button_.OnClick([this]() {
|
|
auto& app = Application::GetInstance();
|
|
app.ToggleChatState();
|
|
});
|
|
pwr_button_.OnLongPress([this]() {
|
|
printf("Power button long press\n");
|
|
// gpio_set_level(BATTERY_EN_PIN, 0);
|
|
if (power_manager_ != nullptr){
|
|
power_manager_->PowerOff();
|
|
}
|
|
});
|
|
|
|
pwr_button_.OnDoubleClick([this]() {
|
|
static uint8_t brightness_last = 0;
|
|
auto backlight = Board::GetInstance().GetBacklight();
|
|
if (backlight->brightness() == 0) {
|
|
brightness_last = 0;
|
|
if (brightness_last == 0) {
|
|
backlight->SetBrightness(50, true);
|
|
} else {
|
|
backlight->SetBrightness(brightness_last, true);
|
|
}
|
|
} else {
|
|
brightness_last = backlight->brightness();
|
|
backlight->SetBrightness(0);
|
|
}
|
|
});
|
|
pwr_button_.OnMultipleClick([this]() {
|
|
EnterWifiConfigMode();
|
|
}, 3);
|
|
pwr_button_.OnPressUpDel();
|
|
});
|
|
|
|
volume_up_button_.OnClick([this]() {
|
|
auto codec = Board::GetInstance().GetAudioCodec();
|
|
auto volume = codec->output_volume() + 10;
|
|
if (volume > 100) {
|
|
volume = 100;
|
|
}
|
|
codec->SetOutputVolume(volume);
|
|
GetDisplay()->ShowNotification(Lang::Strings::VOLUME + std::to_string(volume/10));
|
|
});
|
|
|
|
volume_up_button_.OnLongPress([this]() {
|
|
Board::GetInstance().GetAudioCodec()->SetOutputVolume(100);
|
|
GetDisplay()->ShowNotification(Lang::Strings::MAX_VOLUME);
|
|
});
|
|
|
|
volume_down_button_.OnClick([this]() {
|
|
auto codec = Board::GetInstance().GetAudioCodec();
|
|
auto volume = codec->output_volume() - 10;
|
|
if (volume < 0) {
|
|
volume = 0;
|
|
}
|
|
codec->SetOutputVolume(volume);
|
|
GetDisplay()->ShowNotification(Lang::Strings::VOLUME + std::to_string(volume/10));
|
|
});
|
|
|
|
volume_down_button_.OnLongPress([this]() {
|
|
Board::GetInstance().GetAudioCodec()->SetOutputVolume(0);
|
|
GetDisplay()->ShowNotification(Lang::Strings::MUTED);
|
|
});
|
|
|
|
#if CONFIG_USE_DEVICE_AEC
|
|
volume_down_button_.OnDoubleClick([this]() {
|
|
auto& app = Application::GetInstance();
|
|
if (app.GetDeviceState() == kDeviceStateIdle) {
|
|
app.SetAecMode(app.GetAecMode() == kAecOff ? kAecOnDeviceSide : kAecOff);
|
|
}
|
|
});
|
|
#endif
|
|
}
|
|
|
|
// 初始化工具
|
|
void InitializeTools() {
|
|
auto &mcp_server = McpServer::GetInstance();
|
|
mcp_server.AddTool("self.system.reconfigure_wifi",
|
|
"Reboot the device and enter WiFi configuration mode.\n"
|
|
"**CAUTION** You must ask the user to confirm this action.",
|
|
PropertyList(), [this](const PropertyList& properties) {
|
|
EnterWifiConfigMode();
|
|
return true;
|
|
});
|
|
}
|
|
|
|
public:
|
|
CustomBoard() :
|
|
pwr_button_(PWR_BUTTON_GPIO),
|
|
volume_up_button_(VOLUME_UP_BUTTON_GPIO),
|
|
volume_down_button_(VOLUME_DOWN_BUTTON_GPIO) {
|
|
InitializePowerManager();
|
|
InitializePowerSaveTimer();
|
|
InitializeI2c();
|
|
InitializeSpi();
|
|
InitializeLcdDisplay();
|
|
InitializeTouch();
|
|
InitializeButtons();
|
|
InitializeTools();
|
|
GetBacklight()->RestoreBrightness();
|
|
}
|
|
|
|
virtual AudioCodec* GetAudioCodec() override {
|
|
static BoxAudioCodec audio_codec(
|
|
i2c_bus_,
|
|
AUDIO_INPUT_SAMPLE_RATE,
|
|
AUDIO_OUTPUT_SAMPLE_RATE,
|
|
AUDIO_I2S_GPIO_MCLK,
|
|
AUDIO_I2S_GPIO_BCLK,
|
|
AUDIO_I2S_GPIO_WS,
|
|
AUDIO_I2S_GPIO_DOUT,
|
|
AUDIO_I2S_GPIO_DIN,
|
|
AUDIO_CODEC_PA_PIN,
|
|
AUDIO_CODEC_ES8311_ADDR,
|
|
AUDIO_CODEC_ES7210_ADDR,
|
|
true);
|
|
return &audio_codec;
|
|
}
|
|
|
|
virtual Display* GetDisplay() override {
|
|
return display_;
|
|
}
|
|
|
|
virtual Backlight* GetBacklight() override {
|
|
static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
|
|
return &backlight;
|
|
}
|
|
|
|
virtual bool GetBatteryLevel(int &level, bool& charging, bool& discharging) override {
|
|
static bool last_discharging = false;
|
|
charging = power_manager_->IsCharging();
|
|
discharging = power_manager_->IsDischarging();
|
|
if (discharging != last_discharging) {
|
|
power_save_timer_->SetEnabled(discharging);
|
|
last_discharging = discharging;
|
|
}
|
|
|
|
level = power_manager_->GetBatteryLevel();
|
|
return true;
|
|
}
|
|
|
|
virtual void SetPowerSaveLevel(PowerSaveLevel level) override {
|
|
if (level != PowerSaveLevel::LOW_POWER) {
|
|
power_save_timer_->WakeUp();
|
|
}
|
|
WifiBoard::SetPowerSaveLevel(level);
|
|
}
|
|
};
|
|
|
|
DECLARE_BOARD(CustomBoard);
|