253 lines
8.4 KiB
C++
253 lines
8.4 KiB
C++
#include "wifi_board.h"
|
|
#include "display/lcd_display.h"
|
|
|
|
#include "codecs/box_audio_codec.h"
|
|
#include "application.h"
|
|
#include "button.h"
|
|
#include "mcp_server.h"
|
|
#include "config.h"
|
|
#include "power_save_timer.h"
|
|
#include "i2c_device.h"
|
|
|
|
#include <esp_log.h>
|
|
#include <esp_lcd_panel_vendor.h>
|
|
#include <driver/i2c_master.h>
|
|
|
|
#include <esp_lcd_touch_gt911.h>
|
|
#include <esp_lvgl_port.h>
|
|
#include <lvgl.h>
|
|
|
|
#include <esp_lcd_panel_io.h>
|
|
#include <esp_lcd_panel_ops.h>
|
|
#include <esp_lcd_panel_rgb.h>
|
|
|
|
#define TAG "WaveshareEsp32s3TouchLCD43c"
|
|
|
|
class CustomBacklight : public Backlight {
|
|
public:
|
|
CustomBacklight(esp_io_expander_handle_t io_handle)
|
|
: Backlight(), io_handle_(io_handle) {}
|
|
|
|
protected:
|
|
esp_io_expander_handle_t io_handle_;
|
|
|
|
virtual void SetBrightnessImpl(uint8_t brightness) override {
|
|
if (brightness > 100) brightness = 100;
|
|
int flipped_brightness = 100 - brightness;
|
|
|
|
custom_io_expander_set_pwm(io_handle_, flipped_brightness * 255 / 100);
|
|
}
|
|
};
|
|
|
|
|
|
class WaveshareEsp32s3TouchLCD43c : public WifiBoard {
|
|
private:
|
|
i2c_master_bus_handle_t i2c_bus_;
|
|
LcdDisplay* display_;
|
|
esp_io_expander_handle_t io_expander = NULL;
|
|
PowerSaveTimer* power_save_timer_;
|
|
CustomBacklight *backlight_;
|
|
|
|
void InitializePowerSaveTimer() {
|
|
power_save_timer_ = new PowerSaveTimer(-1, 60, 300);
|
|
power_save_timer_->OnEnterSleepMode([this]() {
|
|
GetDisplay()->SetPowerSaveMode(true);
|
|
GetBacklight()->SetBrightness(10); });
|
|
power_save_timer_->OnExitSleepMode([this]() {
|
|
GetDisplay()->SetPowerSaveMode(false);
|
|
GetBacklight()->RestoreBrightness();});
|
|
power_save_timer_->SetEnabled(true);
|
|
}
|
|
|
|
void InitializeGpio() {
|
|
// Zero-initialize the GPIO configuration structure
|
|
gpio_config_t io_conf = {};
|
|
io_conf.intr_type = GPIO_INTR_DISABLE; // Disable interrupts for this pin
|
|
io_conf.pin_bit_mask = 1ULL << BSP_LCD_TOUCH_INT; // Select the GPIO pin using a bitmask
|
|
io_conf.mode = GPIO_MODE_OUTPUT; // Set pin as output
|
|
io_conf.pull_up_en = GPIO_PULLUP_DISABLE; // Disable pull-up
|
|
gpio_config(&io_conf); // Apply the configuration
|
|
}
|
|
|
|
void InitializeCodecI2c() {
|
|
// Initialize I2C peripheral
|
|
i2c_master_bus_config_t i2c_bus_cfg = {
|
|
.i2c_port = I2C_NUM_0,
|
|
.sda_io_num = BSP_I2C_SDA,
|
|
.scl_io_num = BSP_I2C_SCL,
|
|
.clk_source = I2C_CLK_SRC_DEFAULT,
|
|
.glitch_ignore_cnt = 7,
|
|
.trans_queue_depth = 0,
|
|
.flags = {
|
|
.enable_internal_pullup = 1,
|
|
},
|
|
};
|
|
ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
|
|
}
|
|
|
|
void InitializeCustomio(void) {
|
|
custom_io_expander_new_i2c_ch32v003(i2c_bus_, BSP_IO_EXPANDER_I2C_ADDRESS, &io_expander);
|
|
esp_io_expander_set_dir(io_expander, BSP_POWER_AMP_IO | BSP_LCD_BACKLIGHT | BSP_LCD_TOUCH_RST , IO_EXPANDER_OUTPUT);
|
|
esp_io_expander_set_level(io_expander, BSP_POWER_AMP_IO | BSP_LCD_BACKLIGHT | BSP_LCD_TOUCH_RST , 1);
|
|
|
|
esp_io_expander_set_level(io_expander, BSP_LCD_TOUCH_RST, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
gpio_set_level(BSP_LCD_TOUCH_INT, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
esp_io_expander_set_level(io_expander, BSP_LCD_TOUCH_RST, 1);
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
}
|
|
|
|
void InitializeRGB() {
|
|
esp_lcd_panel_io_handle_t panel_io = nullptr;
|
|
esp_lcd_panel_handle_t panel_handle = nullptr;
|
|
|
|
esp_lcd_rgb_panel_config_t rgb_config = {
|
|
.clk_src = LCD_CLK_SRC_DEFAULT,
|
|
.timings = {
|
|
.pclk_hz = 16 * 1000 * 1000,
|
|
.h_res = BSP_LCD_H_RES,
|
|
.v_res = BSP_LCD_V_RES,
|
|
.hsync_pulse_width = 4,
|
|
.hsync_back_porch = 4,
|
|
.hsync_front_porch = 8,
|
|
.vsync_pulse_width = 4,
|
|
.vsync_back_porch = 4,
|
|
.vsync_front_porch = 8,
|
|
.flags = {
|
|
.pclk_active_neg = true
|
|
}
|
|
},
|
|
.data_width = 16,
|
|
.bits_per_pixel = 16,
|
|
.num_fbs = 2,
|
|
.bounce_buffer_size_px = BSP_LCD_H_RES * 10,
|
|
.psram_trans_align = 64,
|
|
.hsync_gpio_num = BSP_LCD_HSYNC,
|
|
.vsync_gpio_num = BSP_LCD_VSYNC,
|
|
.de_gpio_num = BSP_LCD_DE,
|
|
.pclk_gpio_num = BSP_LCD_PCLK,
|
|
.disp_gpio_num = BSP_LCD_DISP,
|
|
.data_gpio_nums = {
|
|
BSP_LCD_DATA0, BSP_LCD_DATA1, BSP_LCD_DATA2, BSP_LCD_DATA3,
|
|
BSP_LCD_DATA4, BSP_LCD_DATA5, BSP_LCD_DATA6, BSP_LCD_DATA7,
|
|
BSP_LCD_DATA8, BSP_LCD_DATA9, BSP_LCD_DATA10, BSP_LCD_DATA11,
|
|
BSP_LCD_DATA12, BSP_LCD_DATA13, BSP_LCD_DATA14, BSP_LCD_DATA15
|
|
},
|
|
.flags = {
|
|
.fb_in_psram = 1,
|
|
},
|
|
};
|
|
|
|
ESP_ERROR_CHECK(esp_lcd_new_rgb_panel(&rgb_config, &panel_handle));
|
|
ESP_ERROR_CHECK(esp_lcd_panel_init(panel_handle));
|
|
|
|
display_ = new RgbLcdDisplay(panel_io, panel_handle,
|
|
BSP_LCD_H_RES, BSP_LCD_V_RES, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X,
|
|
DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY);
|
|
|
|
backlight_ = new CustomBacklight(io_expander);
|
|
backlight_->RestoreBrightness();
|
|
}
|
|
|
|
void InitializeTouch() {
|
|
esp_lcd_touch_handle_t tp;
|
|
esp_lcd_touch_config_t tp_cfg = {
|
|
.x_max = BSP_LCD_H_RES - 1,
|
|
.y_max = BSP_LCD_V_RES - 1,
|
|
.rst_gpio_num = GPIO_NUM_NC,
|
|
.int_gpio_num = GPIO_NUM_NC,
|
|
.levels = {
|
|
.reset = 0,
|
|
.interrupt = 0,
|
|
},
|
|
.flags = {
|
|
.swap_xy = 0,
|
|
.mirror_x = 0,
|
|
.mirror_y = 0,
|
|
},
|
|
};
|
|
esp_lcd_panel_io_handle_t tp_io_handle = NULL;
|
|
esp_lcd_panel_io_i2c_config_t tp_io_config = {
|
|
.dev_addr = ESP_LCD_TOUCH_IO_I2C_GT911_ADDRESS,
|
|
.control_phase_bytes = 1,
|
|
.dc_bit_offset = 0,
|
|
.lcd_cmd_bits = 16,
|
|
.flags =
|
|
{
|
|
.disable_control_phase = 1,
|
|
}
|
|
};
|
|
tp_io_config.scl_speed_hz = 400 * 1000;
|
|
|
|
esp_lcd_new_panel_io_i2c(i2c_bus_, &tp_io_config, &tp_io_handle);
|
|
|
|
ESP_LOGI(TAG, "Initialize touch controller");
|
|
ESP_ERROR_CHECK(esp_lcd_touch_new_i2c_gt911(tp_io_handle, &tp_cfg, &tp));
|
|
const lvgl_port_touch_cfg_t touch_cfg = {
|
|
.disp = lv_display_get_default(),
|
|
.handle = tp,
|
|
};
|
|
lvgl_port_add_touch(&touch_cfg);
|
|
ESP_LOGI(TAG, "Touch panel initialized successfully");
|
|
}
|
|
|
|
// Initialization tool
|
|
void InitializeTools() {
|
|
auto &mcp_server = McpServer::GetInstance();
|
|
mcp_server.AddTool("self.system.reconfigure_wifi",
|
|
"Reboot the device and enter WiFi configuration mode.\n"
|
|
"**CAUTION** You must ask the user to confirm this action.",
|
|
PropertyList(), [this](const PropertyList& properties) {
|
|
EnterWifiConfigMode();
|
|
return true;
|
|
});
|
|
}
|
|
|
|
public:
|
|
WaveshareEsp32s3TouchLCD43c() {
|
|
InitializePowerSaveTimer();
|
|
InitializeGpio();
|
|
InitializeCodecI2c();
|
|
InitializeCustomio();
|
|
InitializeRGB();
|
|
InitializeTouch();
|
|
InitializeTools();
|
|
GetBacklight()->SetBrightness(100);
|
|
}
|
|
|
|
virtual AudioCodec* GetAudioCodec() override {
|
|
static BoxAudioCodec audio_codec(
|
|
i2c_bus_,
|
|
AUDIO_INPUT_SAMPLE_RATE,
|
|
AUDIO_OUTPUT_SAMPLE_RATE,
|
|
BSP_I2S_MCLK,
|
|
BSP_I2S_SCLK,
|
|
BSP_I2S_LCLK,
|
|
BSP_I2S_DOUT,
|
|
BSP_I2S_DSIN,
|
|
BSP_PA_PIN,
|
|
BSP_CODEC_ES8311_ADDR,
|
|
BSP_CODEC_ES7210_ADDR,
|
|
AUDIO_INPUT_REFERENCE);
|
|
return &audio_codec;
|
|
}
|
|
|
|
virtual Display* GetDisplay() override {
|
|
return display_;
|
|
}
|
|
|
|
virtual Backlight *GetBacklight() override {
|
|
return backlight_;
|
|
}
|
|
|
|
virtual void SetPowerSaveLevel(PowerSaveLevel level) override {
|
|
if (level != PowerSaveLevel::LOW_POWER) {
|
|
power_save_timer_->WakeUp();
|
|
}
|
|
WifiBoard::SetPowerSaveLevel(level);
|
|
}
|
|
};
|
|
|
|
DECLARE_BOARD(WaveshareEsp32s3TouchLCD43c);
|