DFRobot 行空板 K10
按键配置
- A：短按-打断/唤醒，长按1s-音量调大
- B：短按-打断/唤醒，长按1s-音量调小
编译配置命令
配置编译目标为 ESP32S3：
idf.py set-target esp32s3
打开 menuconfig：
idf.py menuconfig
选择板子：
Xiaozhi Assistant -> Board Type -> DFRobot 行空板 K10
修改 psram 配置：
Component config -> ESP PSRAM -> SPI RAM config -> Mode (QUAD/OCT) -> Octal Mode PSRAM
使能摄像头缓冲区大小端交换：
Xiaozhi Assistant -> Camera Configuration -> Enable software camera buffer endianness swapping
配置摄像头：
Component config -> Espressif Camera Sensors Configurations -> Camera Sensor Configuration -> Select and Set Camera Sensor -> GC2145 -> Auto detect GC2145
Component config -> Espressif Camera Sensors Configurations -> Camera Sensor Configuration -> Select and Set Camera Sensor -> GC2145 -> Select default output format for DVP interface (RGB565 800x600 20fps, DVP 8-bit, 20M input) -> RGB565 800x600 20fps, DVP 8-bit, 20M input
编译：
idf.py build